6-Port 10/100M PoE+ Switch 60W, FS1006P

Code - 914634

Brand - Cudy

Description

FS1006P is a 6-Port Unmanaged Switch, equipped with 4 × 10/100 Mbps PoE+ ports and, importantly, 2 × Uplink ports. The presence of two Uplink ports allows you to simultaneously connect the switch to a router (for Internet) and an NVR (video recorder) without occupying PoE ports dedicated to cameras. The total power of the switch is 65W (maximum 30W per port). The model features special operation modes (DIP Switch): VLAN (port isolation for security and network stability) and Extend, which increases the signal transmission distance up to 250 meters.

Features:
- Standards: Comply with IEEE802.3af/at Standard.
- Power: 60 Watts total PoE Budget, supports PoE Power up to 30W for each PoE port.
- Security: Auto-detect power device, without burning a non-standard PoE device or a normal PoE switch.
- Prioritization: Support port power supply prioritization, guarantee the continuous power supply of key nodes.
- Modes: Support Extend/VLAN mode.
- Flow Control: Support IEEE802.3x full duplex flow control and Backpressure half duplex flow control.
- Forwarding: Line-speed forwarding, intelligent identification.
- Method: Support store and forward data exchange.

Description / Specification

Downloads

Power Input	AC 100-240V, 50/60Hz
Bandwidth	1.2 Gbps
PoE Port Output	DC 52V
PoE Ports	4 × 10/100 Mbps PoE+ RJ45 (Port 1-4)
Uplink Ports	2 × 10/100 Mbps Ethernet RJ45
Total Ports	6 Physical Interfaces
Power Per Port	Max 30W
Total Power	Total Power: 65W / Power Budget: 60W
PoE Standard	IEEE 802.3af (15.4W) / IEEE 802.3at (30W)
Power Pin	1/2 (+), 3/6 (-)
MAC Address	1K
Packet Buffer Memory	448K
Forwarding Mode	Store-And-Forward
Operating Temperature	-20°C ~ 50°C
Dimension	200 × 120 × 45 mm

FS1006P_V2.0_Datasheet.pdf

Download

FS1006P_Quick_Installation_Guide.pdf