Detectors

SensoMAG S30 is an optical-smoke detector with a digital processing algorithm. The detector is designed to detect smoke in the very early stage of the fire situation. SensoMAG S30 is suitable for installation in any conventional fire alarm system designed with a fire alarm panel with a fire alarm threshold between 10mA and 15mA. Features: - Certified by EN54-7 standard - Auto temperature compensation - Digital processing algorithm - Thin and simple design - LED indicator with 360° visibility - Status indication every 8 seconds

SensoMAG M40 is a combined (smoke and temperature) detector with a digital processing algorithm, class A1/R. An integrated automatic recovery algorithm significantly reduces false alarm cases. The SensoMAG M40 can be installed in any conventional fire system operating within the 10mA and 15mA alarm thresholds. Features: - Certified by EN54-5/7 standard - Automatic temperature compensation - Digital processing algorithm - Low, slim design - LED indicator with 360° visibility - Status indication every 8 seconds

SensoMAG R20 is a conventional temperature detector with a digital processing algorithm. The detector reacts both to a rapid rise in temperature and to temperatures above 58°C. The SensoMAG R20 can be used in any conventional fire alarm system with fire alarm thresholds of 10mA to 15mA. Features: - Reacts to a rapid rise in temperature and also to temperatures above 58°C - Digital processing algorithm - Thin and simple design - LED indicator with 360° visibility - Status indication every 8 seconds - Certified by EN54-5 standard

SensoMAG F10 is a fixed temperature detector with a digital processing algorithm. The detector is designed to detect temperatures above 60°C (class A2/S, according to EN54-5). SensoMAG F10 is suitable for environments, where sudden large temperature changes are considered as normal, rooms with a high concentration of vaporous, exhaust gases, dust, etc. For example kitchens, garages, boiler rooms, or other places where it is not convenient to install fire alarm optical smoke detectors. Features: - Detects temperatures over 60°C, class A2/S - Digital process algorithm - Low-profile design - LED indication with 360° visibility - Sensor status indication every 8 seconds - EN54 – 5 certified

SensoMAG B12L/U is an alarm base (12V) with relay output. The base has two operation modes: Latch and Unlatch. The base is designed for conventional detectors SensoMAG series: F10, F10B, R20, S30, and M40 for applications in security alarm systems. The base is with low profile design and a reliable contact system. It is possible to lock the detector to the base for extra security. Features: - 12V - Application in intruder alarm systems - Latched/Unlatched mode

SensoMAG B24 is a standard base for conventional detectors SensoMAG series: F10, F10B, R20, S30, and M40. The base is with low profile design and a reliable contact system. It is possible to lock the detector to the base for extra security. - Compatible with alarm panels alarm state current up to 15 mA

SensoMAG MCP50 is a manual call point designed to work in conventional fire alarm systems. The call point has a resettable fragile working element, that sends an alarm signal to the fire alarm panel when triggered by a push in the indicated spot. The LED indication informs the user of fire and test events. Features: - Surface mounting - Resettable flexible element - LED indication - Special tool for resetting after alarm event - It is possible to attach a protective cap to the button (need to purchase separately, code - 40202191) - EN54 – 11 certified - Rate of protection IP 40

Reflective Beam Detector AW-BK901, has built-in Laser beam pointing and a Digital guide display for a real user-friendly alignment method. Features: - Manufacture in compliance with EN54-12 - Hassle-free alignment, built with digital guide display and laser beam pointing - Four ranges wide monitoring from 8-100 meters via encoder - Three users programming sensitivity adjustment - Built-in microprocessor - Self-diagnosis function can monitor for internal faults - Fire and Fault interfacing relays

Fireray One is a stand-alone beam detector, its priority is ease of installation. Features: - Integrated user interface - Alignment mode switch, alignment direction buttons and duration switches for alarm response threshold - Alignment status indicator - 2 green LEDs and 1 yellow LED - Green LED flashes every 10 seconds during stability - The red LED flashes every 10 seconds during a fault - Yellow LED flashes every 10 seconds for contamination or every 5 seconds for contamination

Fireray Long Range Kit 1010-000 is an accessory that increases the operating range of 6010-100 Fireray One from 50m to 120m.

400-series non-addressable carbon monoxide (CO) gas alarms are suitable for connection to 2-wire and 4-wire non-addressable fire detection control and indicating equipment. 400 detectors can also connect to 2-wire and 4-wire addressable fire detection control and indicate the equipment that can accept non-addressable detectors. Advanced electronics in conjunction with a semiconductor gas sensor provide early detection of carbon monoxide gas and high immunity against unwanted alarms. - Detector auto-reset once gas levels fall below alarm threshold levels - 2-wire and 4-wire models for DC 12 V and DC 24 V operation - Magnet-initiated alarm test function - N/C or N/O alarm relay output - Loud 85 dB internal sounder