ProsTE პროგრამა Teletek-ის პანელების პროგრამირებისთვის

SensoIRIS GAS is an addressable gas, LPG and CH4 (methane) leak detector. The gas detector has an automatic diagnostic function, it constantly checks the status of the sensor and electronics. SensoIRIS GAS is equipped with a button with the following functions: - Short press activates "SILENCING" mode, green LED flashes, buzzer and panel activation are disabled for 5 minutes. - If pressed for longer than 5 seconds, the "TEST" mode is activated, in this case the green, red and yellow LEDs are activated. The panel and buzzer are also activated. After 6 seconds, the gas detector emits 2 short beeps and turns off the "TEST" mode.

SensoMAG MCP150 is a fire alarm button with a built-in isolator module. The button is intended for addressable fire systems operating on the TTE protocol. The alarm button is activated by a finger press and sends a signal to the control panel to trigger an alarm for further response. Features: - Certified by EN54-11, EN54-17 and LPCB standard - Surface mounting - Reloadable construction - LED indicator - Includes a tool to reset the button - it is possible to attach a protective cap to the button (need to purchase separately, code - 40202191) - IP40 protection - Built-in isolator module

SensoIRIS MCP150 IP67 is a waterproof addressable manual call point designed for outdoor installations and IP67 environments, with a built-in isolator module. The call point is equipped also with a protective transparent cover for avoiding fault or accidental activation. SensoIRIS MCP150 IP67 is powered on from the fire panel and can be controlled via the communication protocol. Features: - Built-in isolator module - Surface mounting - Type (according to EN54-11) – A - LED indication - Special test tool for resetting after alarm event - Protective plastic cover - IP67 according EN 60529

The addressable manual call point is designed for application in addressable fire alarm systems, which support TTE communication protocol. The call point has a built-in isolator module which when used allows continuous operation of the loop in case of a short circuit and without the need of using additional isolator modules. The call point is powered on from the fire panel and can be controlled via the communication protocol. Features: - Working element (2 parts) - Frangible element – non-resettable (a broken glass) - Operating element – resettable (a button) - Call point type (method of operation according to EN 54-11) – B - Built-in isolator module - EN54-11 and EN54-17 certified

SensoIRIS S130 IS is аn addressable optical-smoke detector with a built-in isolator designed for installation in addressable fire alarm systems supporting TTE communication protocol. The detector is powered on from the panel and can be controlled via the communication protocol. The detector SensoIRIS S130 IS is compatible with fire base B124. - Sensitivity level selectable from the control panel – High/Normal/Middle/Low - Low-profile design - Led indication with 360° visibility - Built-in isolator - EN54-7 and EN54-17 certified

The SensoIRIS M140 IS an addressable combined (temperature and smoke) detector with a built-in isolator that can be placed to detect fires at an early stage. The detector works with panels that support the TTE communication protocol. The detector is compatible with the firebase B124 Available in two colors: white and black Features: - Sensitivity adjustment from the panel - Day/night mode - Thin and simple design - LED indicator with 360° visibility - Status indication - Built-in isolator - EN54-5, EN54-7 and EN54-17 certified

SensoIRIS T110 IS is аn addressable heat detector with built-in isolator designed for installation in addressable fire alarm systems supporting TTE communication protocol. Features: - Can work as a fixed temperature or rate of rise detector - Class, selectable from the control panel – A1/R, A2/S, B/S - Low profile design - LED indication with 360° visibility - Built-in isolator - EN54-5 and EN54-17 certified

SensoIRIS S130 IS Black is аn addressable optical-smoke detector with a built-in isolator designed for installation in addressable fire alarm systems supporting TTE communication protocol. The detector is powered on from the panel and can be controlled via the communication protocol. The detector SensoIRIS S130 IS is compatible with fire base B124. Features: - Sensitivity level selectable from the control panel – High/Normal/Middle/Low - Low-profile design - Led indication with 360° visibility - Built-in isolator - EN54-7 and EN54-17 certified

SensoIRIS B124 Black is a standard base for addressable detectors and sounders SensoIRIS Series. Features: - Color Black - Low-profile design - Reliable contact system - Possibility of locking the detector to the base

SensoIRIS BSOU IS Black is аn addressable firebase with a built-in sounder and isolator module in its body. SensoIRIS BSOU IS Black is designed for installation in addressable fire alarm systems supporting TTE communication protocol. The device is powered on from the panel and can be controlled via the communication protocol. The addressable SensoIRIS BSOU IS Black firebase supports 32 different tone types at two sound levels The device is designed for easy installation and consists of two parts: mounting plane basis and sounder and strobe in a common body with factory mounted firebase. Features: - Selectable sound level – LOW (82-92dB)* and HIGH (100-103dB)* - 32 sound types selectable from the panel - Loop powered - EN54-3 and EN54-17 Certified - Compatible with SensoIRIS addressable detectors series: T110, T110 IS, S130, S130 IS, M140 and M140 IS

SensoIRIS WSST IS EN54-23 is аn addressable VAD (Visual Alarm Device) Wall Mount Sounder and Strobe with built-in isolator module, designed for installing in addressable fire alarm systems supporting TTE communication protocol. The device is powered on from the panel and can be controlled via the communication protocol. SensoIRIS WSST IS is compatible with fire bases B124 for ceiling or wall mounting and WSB IP65 for wall mounting. SensoIRIS WSST IS is certified according to EN54-3, EN54-17 and EN54-23 in LPCB! Features: - Selectable sound level – LOW (80-88dB)* and HIGH (92-98dB)* - 32 sound types selectable from the panel - Piezo sounder - White LED flash - Loop synchronization - Transparent plastic case - EN54 – 23/3/17 certificated

SensoIRIS WSST EN54-23 is аn addressable VAD (Visual Alarm Device) Wall Mount Sounder and Strobe, designed for installing in addressable fire alarm systems supporting TTE communication protocol. The device is powered on from the panel and can be controlled via the communication protocol. SensoIRIS WSST EN54-23 is compatible with fire bases B124 for ceiling or wall mounting and WSB IP65 for wall mounting. SensoIRIS WSST EN54-23 is certified according to EN54-3 and EN54-23! Feature: - Selectable sound level – LOW (80-86dB)* and HIGH (92-97dB)* - 32 sound types selectable from the panel - Piezo sounder - White LED flash - Loop synchronization - Transparent plastic case - EN54 – 23/3 certificated

SensoIRIS WS IS is an addressable siren with strobe light that works with fire panels that support the TTE communication protocol. The device is powered from the panel and can be controlled remotely. SensoIRIS WS IS compatible with bases B124 for ceiling or wall mounting and WSB IP65 for wall mounting. Features: - Certified by EN54-3 and EN54-17 standard - Sound level selection - Selection of 32 different tones of sound - Piezo siren - Circuit synchronization

SensoIRIS WSB IP65 is a waterproof protected deep base specially designed for outdoor installations of addressable sounders SensoIRIS series. The deep base is suitable for wall mounting in applications in aggressive environments requiring IP65 protection of the devices. SensoIRIS B124 standard base is mounted with screws. Features: - Certified by EN 60529 standard - Protection IP65 - Surface mounting - wire max. Cross section 3 mm - Compatible with SensoIRIS series directional sirens

SIMPO TTE loop is a circuit expander for the addressable fire panel SIMPO. Through it, additional 250 devices can be added to the circuit. The circuit extender supports the TTE communication protocol. Features: - Ability to connect a maximum of 250 devices - circuit devices max. consumption - 0.5 amp

IRIS TTE loop is a loop expander for 1 loop in IRIS 8 Addressable Fire Alarm Systems. The loop expander supports TTE communication protocol and is designed to operate with SensoIRIS detectors, modules, and sirens. Feature: - Communication Protocol: TTE (Teletek Electronics) - Maximum number of devices: up to 250 - Maximum consumption of the loop devices: 0.5A

TTE LAN is a universal transmission module for alarms and other events. It can be used as a fire and security alarm panel, and as a separate condition, independent separately. TTE LAN module, SIMPO and ECLIPSE panels with safety serial communication method, and panels of other manufacturers - with 6 replacement/output terminals (I/O 1 - I/O 6). TTE can also be used for remote control and monitoring of various devices. Features: - It has an indication of the connection to the network and the panel - It can be programmed remotely with AJAX SP PRO/MobileTTE (iOS/Android) applications - Micro USB port, software to connect to ProsTE - Serial communication method with SIMPO and ECLIPSE panels - 6 programming inputs/outputs, collector type (100mA each) - Ability to write network settings manually

Redundant module is used to create an RS485 protocol network between address panels SIMPO, IRIS, IRIS PRO. The module allows up to 32 fire protection panels to be connected to each other in a network. The maximum distance between two Redundant modules is 1000 m. Features: - panels max. Number in the network - 32 - Communication method - RS485 - The module is connected to the motherboard of the panel - programmable from the panel - Feeding from the panel - Max. Distance between 2 panels - 1000 meters - Cable type - twisted pair - Cable cross-section - 0.5 – 2.5 mm²

The SensoIRIS MINP M is a compact module with one input (switch). The module monitors and transfers to control panel the state of this input – state ON or state OFF. Features: - Used for connection of external devices, gas detection, panic switches, etc - Compact size for built in mounting

SensoIRIS MiniOUT is a compact addressable module with single non-monitored output. The module is designed for built-in installation in the external devices or directly for wall mounting. SensoIRIS MiniOUT is powered bythe fire panel . The non-monitored relay output is suitable to switch of 24V AC voltage circuits. The output terminals are wired with color cables for easy recognition during the module’s installation. Features: - Complies with the requirements of EN54-18 - Compact size - One non-monitored output - Powered from the fire panel - Color cables for easy recognition - Compatible with Teletek Addressable control panels iRIS 4 / 8 and Simpo

SensoIRIS MIO22 is an addressable input-output module, designed for application in addressable fire alarm systems, supporting TTE communication protocol. The module monitors 2 analogue input signals and controls 2 relay outputs. SensoIRIS MIO22 is powered on from the fire panel and can be controlled via the communication protocol. Features: - 2 Inputs - 2 Outputs - Loop powered - Built-in isolator - Placed in plastic box with transparent cover for easy inspection - EN54-18, EN54-17 certified

SensoIRIS MIO04 is an addressable module with 4 outputs. It is intended for addressable fire protection systems working on the TTE communication protocol. The SensoIRIS MIO04 is powered from a fire panel and can be controlled via a communication protocol. The module is housed in a plastic box with a transparent lid for visual inspection. Features: - 4 speakers - Feeding from the circuit - Integrated isolator - Certified EN54-18, EN54-17:2005

SensoIRIS MIO40 is an addressable module with 4 inputs. Designed for addressable fire protection systems working on the TTE communication protocol. SensoIRIS MIO40 is powered from a fire panel and can be controlled via a communication protocol. The module is housed in a plastic box with a transparent lid for visual inspection. Features: - 4 entrances - Feeding from the circuit - Integrated insulator - Certified EN54-18, EN54-17:2005

SensoIRIS MC-Z is an addressable conventional zone module, designed for application in addressable fire alarm systems, supporting TTE communication protocol. The module monitors the state of the connected conventional fire line and reports its status to the control panel. SensoIRIS MC-Z is powered on from the fire panel and can be controlled via the communication protocol. Features: - Max number of detectors in one zone – 32 - Built-in isolator - Placed in a plastic box with a transparent cover for easy inspection