Fire alarm

Natron WE-A is an addressable wireless gateway module designed for operation with iRIS8 and iRIS4 addressable fire alarm panels. Natron WE-A is powered directly by the loop line and can be controlled via the communication protocol. Up to 5 Natron WE-A wireless getaway modules can be connected to a single iRIS8/iRIS4 fire alarm control panel. Natron WE-A communicates with Natron series wireless devices enrolled to its configuration. Up to 32 wireless devices can be enrolled to each gateway module, giving a total of 160 wireless devices per system. Each wireless device receives an own address in the panel configuration and can be managed independently. Natron WE-A is mounted in a compact plastic enclosure box suitable for wall mounting. The information of the status of the enrolled wireless devices is presented on a LCD text display. Features: - Standards applied: EN 54-18; EN 54-17; EN 54-25 - Built-in isolator module - Up to 5 wireless gateway to iRIS8/iRIS4 addressable panel - Up to 32 NATRON series wireless devices enrolled to a gateway module - 160 wireless devices per system - Dipole antenna, SMA connector type - Event messages for wireless device status: low battery, tamper, lost device - Menu for reviewing the signal strength of the enrolled devices - LCD display, dot matrix 16×2

Natron WE-C is a wireless gateway module designed for operation with conventional fire alarm panels, including MAG series panel, produced by Teletek Electronics JSC. Natron WE-C is powered from external power supply with back-up battery. The module is equipped with special inputs for monitoring the main and back-up power supplies. Up to 5 Natron WE-C wireless getaway modules can be connected to a single conventional fire alarm control panel. Natron WE-C communicates with Natron series wireless devices enrolled to its configuration. Up to 32 wireless devices can be enrolled to each gateway module, giving a total of 160 wireless devices per system. Natron WE-C is mounted in a compact plastic enclosure box suitable for wall mounting. The information of the status of the enrolled wireless devices is presented on a LCD text display. The programming of the wireless devices parameters is from the module menus. Features: - Standards applied: EN 54-18; EN 54-25 - Specially designed to work with any conventional fire alarm panel - Direct connection to conventional zone terminal - Compatible for operation with MAG series and third-party conventional fire alarm control panels - Up to 5 wireless gateways to conventional panel/building* - Up to 32** NATRON series wireless devices enrolled to a gateway module - Up to 160 wireless devices per system - Dipole antenna, SMA connector type - Event messages for wireless device status: low battery, tamper, lost device - Menu for reviewing the signal strength of the enrolled devices - LCD display, dot matrix 16×2

Natron SD Wireless optical-smoke detector, compatible with both – Natron WE-A and Natron WE-C wireless gateways. The signal coverage of the Natron SD reaches up to 1500 (in open area), thanks to our bidirectional wireless communication protocol – Beacon+. The protocol efficiency also contributes to the exceptional battery life that could last to up to 10 years, with 2x CR123A type of batteries. The Natron SD is also equipped with an internal buzzer, used for local sound signaling in case of detector activation (fire condition), as well as build-in tamper switch. Features: - EN 54-7 and EN 54-25 certificated - Bi-directional wireless communications - LEDs indication for 360° visibility - Built-in 80db buzzer - Tamper switch - Sensitivity adjustment - Signal coverage test - Protection – IP30 - Coverage range – 1500 m open area - Long battery life – up to 10 years

Natron MD Wireless combined detector, compatible with both – Natron WE-A and Natron WE-C wireless gateways. Natron MD combines an optical-smoke and a thermal/heat detection parts. The signal coverage of the Natron MD reaches up to 1500 (in open area), thanks to our bi-directional wireless communication protocol – Beacon+. The protocol efficiency also contributes to the exceptional battery life that could last to up to 10 years, with 3x CR123A type of batteries. The Natron MD is also equipped with an internal buzzer, used for local sound signaling in case of detector activation (fire condition), as well as build-in tamper switch. Features: - EN 54-5; EN54-7 and EN 54-25 certificated - Bi-directional wireless communications - Combined – Smoke and Heat detector - Thermal part type – Rate-of-rise - LEDs indication for 360° visibility - Built-in 80db buzzer - Tamper switch - Sensitivity adjustment - Signal coverage test - Protection – IP30 - Coverage range – 1500 m open area - Long battery life – up to 10 years Bi-directional wireless communications Combined – Smoke and Heat detector Thermal part type – Rate-of-rise LEDs indication for 360° visibility Built-in 80db buzzer Tamper switch Sensitivity adjustment Signal coverage test Protection – IP30 Coverage range – 1500 m open area Long battery life – up to 10 years EN 54-5; EN54-7 and EN 54-25 certificated

Wireless heat detector, compatible with both – Natron WE-A and Natron WE-C wireless gateways. Natron TD supports two heat detection methods – fixed temperature and rate-of-rise types. The signal coverage of the Natron TD reaches up to 1500 (in open area), thanks to our bi-directional wireless communication protocol – Beacon+. The protocol efficiency also contributes to the exceptional battery life that could last to up to 10 years, with a single CR123A type of battery. The Natron TD is also equipped with an internal buzzer, used for local sound signaling in case of detector activation (fire condition), as well as build-in tamper switch. Features: - EN 54-5 and EN 54-25 certificated - Bi-directional wireless communications - Selectable Heat detection type – Fixed or Rate-of-rise - Thermal class – A1R, A2S and BS - LEDs indication for 360° visibility - Built-in 80db buzzer - Tamper switch - Sensitivity adjustment - Signal coverage test - Protection – IP30 - Coverage range – 1500 m open area - Long battery life – up to 10 years

Natron MCP Wireless manual call point, compatible with both – Natron WE-A and Natron WE-C wireless gateways. The signal coverage of the Natron MCP reaches up to 1500 (in open area), thanks to our bi-directional wireless communication protocol – Beacon+. The protocol efficiency also contributes to the exceptional battery life that could last to up to 10 years, with a single CR123A type of battery. Features: - EN 54-11 and EN 54-25 certificated - Type of the working element – Resettable (flexible) - Type A - Tamper switch - Optional protective plastic cover - Rate of protection IP40 - Coverage range – 1500 m open area - Signal coverage test - Long battery life – up to 10 years

Wireless gateway modules for integration of Natron wireless devices to iRIS addressable fire series of Wireless wall sounder and strobe, compatible with both – Natron WE-A and Natron WE-C wireless gateways. Natron WSS supports 32 different sound types, selectable from the iRIS panels, as well as two sound levels – high and low. The signal coverage of the Natron WSS reaches up to 1500 (in open area), thanks to our bi-directional wireless communication protocol – Beacon+. The protocol efficiency also contributes to the exceptional battery life that could last to up to 8 years, with 4x CR123A type of batteries. Features: - EN 54-3; EN 54-23; EN 54-25 certificated - Bi-directional wireless communications - Selectable sound level – LOW (80-86dB)* and HIGH (92-97dB) - 32 sound types selectable from the panel - Piezo sounder and white flash - Tamper switch - Signal coverage test - Protection – IP31 - Coverage range – 1500 m open area - Long battery life – up to 8 years

MAG8 Plus is a conventional fire protection panel with 8 fixed zones and expansion to 16 zones, meeting EN54-2/4 standards. Features: - Certified by EN54-2/4-standard - 8 zones (expandable to 16) - Support for 512 detectors and an unlimited number of alarm buttons - 4 monitoring siren outputs, 300mA each - Siren delay - It has the possibility to expand the zone and records module - Deactivation of zones and sirens through the panel - Circuit active EOL termination modules for monitoring each zone - LED indicators - Security key - Plastic box

MAG8 is a conventional fire alarm panel certificated to EN54-2/4, providing 8 fixed zones. Up to 20 (32 SensoMAG Series) fire detectors can be connected to every fire zone. An unlimited number of call points can be connected to every of the fire zones. MAG8 is situated in a plastic box. The panel is easy for installation and maintenance and provides user-friendly daily operation. The panel is suitable for residential, small, and middle office applications with 8 protected areas up to 3000m². The panel is available in different language versions for the front panel. Features: - 8 fully monitored fire zones with up to 32 fire alarm detectors and unlimited number of call points per zone - 2 monitored siren outputs – 24V/ 0.5A each - 1 “fire” and 1 “fault” relay output - Double knock - Siren delay - Supports relay expander and LOG module - Active EOL allowing continuous monitoring of inputs - “One man” zone testing - Multilanguage support - LED indication - Security key - Plastic box

MAG4P is a conventional fire alarm panel with 4 fixed zones and complies with EN54-2/4 standards. Up to 32 TELETEK and up to 20 conventional detectors of other manufacturers can be connected per zone. The number of alarm buttons is not limited per zone. The MAG4P is housed in a plastic case. The panel is easy to install and maintain and also provides comfortable daily use for the user. Features: - Certified by EN54-2/4 standard - 4 fully monitored zones - Ability to connect 32 detectors and an unlimited number of buttons per zone - 2 siren monitoring outputs, 300mA each - 2 relay outputs for alarm and fault notification - LED indicators - Security key - Plastic box

MAG2P is a conventional fire alarm panel certified to EN54-2/4 standard, providing 2 fixed zones. Up to 20 (32 SensoMAG Series) fire detectors can be connected to every fire zone. An unlimited number of call points can be connected to each of the fire zones. MAG2P is situated in a plastic box. The panel is easy for installation and maintenance and provides user-friendly daily operation. The panel is suitable for residential, small, and middle office applications with protected areas up to 1000m². Features: - Certified by EN54-2/4 standard - 2 fully monitored zones - Ability to connect 32 fire detectors and an unlimited number of alarm buttons - 2 monitoring outputs for sirens - 300mA each - 2 relays with NO/NC contacts. Relay 1 will close in case of alarm, relay 2 in case of fault - Circuit termination modules ensure constant monitoring of zones - Zones can be tested easily even by one person - Multilingual front panel - LED indication - Ability to restrict access to functions through a key - Plastic box

SensoMAG S30 is an optical-smoke detector with a digital processing algorithm. The detector is designed to detect smoke in the very early stage of the fire situation. SensoMAG S30 is suitable for installation in any conventional fire alarm system designed with a fire alarm panel with a fire alarm threshold between 10mA and 15mA. Features: - Certified by EN54-7 standard - Auto temperature compensation - Digital processing algorithm - Thin and simple design - LED indicator with 360° visibility - Status indication every 8 seconds

SensoMAG M40 is a combined (smoke and temperature) detector with a digital processing algorithm, class A1/R. An integrated automatic recovery algorithm significantly reduces false alarm cases. The SensoMAG M40 can be installed in any conventional fire system operating within the 10mA and 15mA alarm thresholds. Features: - Certified by EN54-5/7 standard - Automatic temperature compensation - Digital processing algorithm - Low, slim design - LED indicator with 360° visibility - Status indication every 8 seconds

SensoMAG R20 is a conventional temperature detector with a digital processing algorithm. The detector reacts both to a rapid rise in temperature and to temperatures above 58°C. The SensoMAG R20 can be used in any conventional fire alarm system with fire alarm thresholds of 10mA to 15mA. Features: - Reacts to a rapid rise in temperature and also to temperatures above 58°C - Digital processing algorithm - Thin and simple design - LED indicator with 360° visibility - Status indication every 8 seconds - Certified by EN54-5 standard

SensoMAG F10 is a fixed temperature detector with a digital processing algorithm. The detector is designed to detect temperatures above 60°C (class A2/S, according to EN54-5). SensoMAG F10 is suitable for environments, where sudden large temperature changes are considered as normal, rooms with a high concentration of vaporous, exhaust gases, dust, etc. For example kitchens, garages, boiler rooms, or other places where it is not convenient to install fire alarm optical smoke detectors. Features: - Detects temperatures over 60°C, class A2/S - Digital process algorithm - Low-profile design - LED indication with 360° visibility - Sensor status indication every 8 seconds - EN54 – 5 certified

SensoMAG B12L/U is an alarm base (12V) with relay output. The base has two operation modes: Latch and Unlatch. The base is designed for conventional detectors SensoMAG series: F10, F10B, R20, S30, and M40 for applications in security alarm systems. The base is with low profile design and a reliable contact system. It is possible to lock the detector to the base for extra security. Features: - 12V - Application in intruder alarm systems - Latched/Unlatched mode

SensoMAG B24 is a standard base for conventional detectors SensoMAG series: F10, F10B, R20, S30, and M40. The base is with low profile design and a reliable contact system. It is possible to lock the detector to the base for extra security. - Compatible with alarm panels alarm state current up to 15 mA

SF50 is а conventional fire alarm sounder with a strobe and has one input for connection to a conventional fire alarm panel. SF50 is designed for indoor use only. The sounder has a compact size and it is suitable for installation on plain surfaces. The mounting is easy without the need of disassembling any parts of the sounder’s body. The fixing is done with a single screw. BOSEC certified.

SF 300 is an outdoor conventional piezo siren. It has a flat plastic cover, suitable for logo stickers with dimensions up to 220x160mm. The siren is equipped with 2 LED flash indicators. Features: - LED strobe - IP44 protection for electronics -Flat cover for logo sticker - EN 54 – 3 Certified - Two piezo sounders

SensoMAG MCP50 is a manual call point designed to work in conventional fire alarm systems. The call point has a resettable fragile working element, that sends an alarm signal to the fire alarm panel when triggered by a push in the indicated spot. The LED indication informs the user of fire and test events. Features: - Surface mounting - Resettable flexible element - LED indication - Special tool for resetting after alarm event - It is possible to attach a protective cap to the button (need to purchase separately, code - 40202191) - EN54 – 11 certified - Rate of protection IP 40

The ME4 is a zone expansion module for the MAG8plus fire control panel. The module provides a fire system with additional 4 zones. In the standard box of the MAG8plus fire panel, two ME4 expansion modules can be installed, thus expanding the existing system to 16 zones. Features: - Expansion to 4 zones - Instant action mode for zones - LED indicator for zone - Number of detectors in 1 zone 32/128

Reflective Beam Detector AW-BK901, has built-in Laser beam pointing and a Digital guide display for a real user-friendly alignment method. Features: - Manufacture in compliance with EN54-12 - Hassle-free alignment, built with digital guide display and laser beam pointing - Four ranges wide monitoring from 8-100 meters via encoder - Three users programming sensitivity adjustment - Built-in microprocessor - Self-diagnosis function can monitor for internal faults - Fire and Fault interfacing relays

Fireray One is a stand-alone beam detector, its priority is ease of installation. Features: - Integrated user interface - Alignment mode switch, alignment direction buttons and duration switches for alarm response threshold - Alignment status indicator - 2 green LEDs and 1 yellow LED - Green LED flashes every 10 seconds during stability - The red LED flashes every 10 seconds during a fault - Yellow LED flashes every 10 seconds for contamination or every 5 seconds for contamination

Fireray Long Range Kit 1010-000 is an accessory that increases the operating range of 6010-100 Fireray One from 50m to 120m.